Safety specifications for EP fabric conveyor belt

EP fabric conveyor belt is widely used in many industrial fields. To ensure its safe use, the following are some important specifications.

1. Installation stage

When installing EP fabric conveyor belt, ensure that the installation environment is clean and free of sharp foreign objects to prevent the conveyor belt from being scratched. The installer must be professionally trained and operate according to the correct installation process. The tension of the conveyor belt should be moderate. Too loose will cause slippage, affect the conveying efficiency, and even cause material accumulation; too tight will increase the wear of the conveyor belt and the load of the equipment, which can be accurately adjusted by tension measuring equipment.

2. Operation process

Before operation, the conveyor belt should be fully inspected, including whether the belt body is damaged and whether the joint is firm. When starting the equipment, it should be run at no load for a period of time to observe the operating status of the conveyor belt. After there is no abnormality, the material should be loaded.

Control the characteristics of the conveyed material to avoid conveying sharp, large or overweight materials to avoid cutting or crushing the conveyor belt. At the same time, to prevent the deviation of the material, timely adjustment can be made by installing a deviation correction device.

During the operation of the equipment, the wear of the conveyor belt should be checked regularly, especially the parts in contact with the rollers and idlers. If severe wear or partial damage is found, the machine should be stopped for repair or replacement in time.

3. Maintenance and care

Regularly clean the dust and material residue on the surface of the conveyor belt, which can be cleaned with a sweeper. At the same time, the rollers, idlers and other parts should also be cleaned to ensure that they can rotate normally.

According to the user manual of the equipment, lubricate the conveyor belt regularly and lubricate and maintain the relevant transmission parts.

Do a good job of rainproof, moisture-proof and sun-proofing the equipment to prevent the conveyor belt from aging and deformation due to environmental factors. If it is not used for a long time, the conveyor belt should be loosened and properly stored.

Strictly complying with the safety use specifications of ep fabric conveyor belt will help improve the operating efficiency of the equipment, extend the service life of the conveyor belt, and ensure the safety and stability of production.